Identify the approved arrangement
The Bosch WTH85222GB manual lists a Y-distributor for connecting another appliance's drain hose to the same siphon outlet. That is a model-specific accessory arrangement, not permission to push two loose hoses into any available opening. Give the installer both appliance identifiers and a photograph of the accessible sink-trap or standpipe connection. Mention whether the dryer currently collects water in its tank or already uses a drain kit.
Check the route before changing it
Each hose needs its specified height, support and unobstructed path. A shared connection also needs to drain satisfactorily when the appliances discharge. Do not create a temporary bucket arrangement or repeatedly run both machines to test an uncertain connection. Ask the installer to confirm compatibility and secure fitting. If water has already appeared in a tank unexpectedly, backed up or leaked, report which machine was operating and where the first water was seen.
Useful observations
- Provide both models and the existing drain-kit details.
- Photograph accessible plumbing without moving either appliance.
Details to include in your enquiry
- Is a shared-outlet accessory approved for this dryer?
- Did any drainage problem begin when the second appliance was connected?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.