Compare the assembly with the diagram
Once the dryer is stopped and cool, inspect only the removable owner filter parts. Check whether both sections were returned, whether the frame closes normally and whether fluff prevents correct seating. A clean mesh surface does not establish that the whole assembly is fitted correctly. Do not press a distorted filter into position by force.
Keep the timing of the warning
State whether the code appeared immediately after cleaning or had already interrupted drying beforehand. That sequence helps separate an assembly concern from the original complaint. Do not bypass a filter interlock or run without a component to test it. If the intact, correctly fitted assembly still produces the warning, provide its photograph, the complete model and the displayed code for assessment.
Useful observations
- Check every filter component shown in the manual.
- Note whether cleaning preceded the first warning.
Details to include in your enquiry
- Was an inner or outer section removed?
- Does the filter sit flush without pressure?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.