Understand the manufacturer's limited explanation
LG's UK condenser-cleaning guidance explains that some blue corrosion on copper can form a protective surface and that automatic cleaning is not the cause of this process. It also explains that moisture is part of condenser operation. This supports a possible explanation for appearance on the described equipment; it does not establish that every stain, loose deposit or wet patch on every dryer is harmless. Match the model and location before applying the explanation.
Observe without stripping the surface
Only inspect areas the owner manual permits you to access. Do not remove cabinet panels to look for coloured metal, scrub pipes or apply rust remover to the heat exchanger. Record whether the colour is longstanding or has appeared alongside water on the floor, new noise, an error or a change in drying. Those associated symptoms need their own assessment. If the accessible appearance is the only concern, send a clear photograph with the model number so support can distinguish the documented surface change from a condition requiring inspection.
Useful observations
- Record the exact location and colour from a permitted accessible view.
- Describe any performance change separately from appearance.
Details to include in your enquiry
- Is there an actual leak, or only discolouration on metal?
- Does the dryer have the condenser arrangement described in LG's guidance?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.