General guidance · Tumble dryers

Find the correct owner-accessible surfaces

Beko identifies drying-sensor metal surfaces on applicable models and specifies a gentle cleaning method. Use the location shown in your own manual; a metal drum part is not automatically a sensor. Let the appliance cool and follow its isolation instructions before cleaning. A soft cloth and the permitted cleaner are appropriate only where the manufacturer specifies them, and abrasive pads can damage the surfaces.

Connect the cleaning history with the result

Record whether sensor programmes finish unusually early or give inconsistent results while the filter routine has remained unchanged. That observation can help explain why the sensor-cleaning section is relevant, but it does not prove a sensor has failed. Avoid applying coatings, polish or unapproved products to make the metal look brighter. After the prescribed cleaning, make sure the area is dry and the normal removable parts are correctly refitted before later ordinary use.

Useful observations

  • Locate the sensor using the model diagram.
  • Check whether the manual permits a cleaner or only a soft cloth.

Details to include in your enquiry

  • Has this maintenance step ever been completed?
  • Are the inconsistent results confined to sensor programmes?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.