Locate the first visible wet area without taking the toilet apart
Fluidmaster’s repair guide distinguishes leakage at a cistern’s inlet connection from leakage around the joint and fixings between cistern and pan. These locations involve different seals, so describing everything as a leaking toilet can hide useful information. From a safe, accessible position, note where water first becomes visible and whether it was noticed during filling, flushing or while unused. Do not repeatedly flush an active leak to reproduce it. Water can travel down surfaces, so the lowest wet patch on the floor does not prove that the leak begins there.
Keep the joint stable while arranging assessment
Stop using the affected toilet and use a known, accessible isolation valve if water continues escaping. Avoid tightening cistern bolts harder, moving the pan or packing sealant around the outside as an attempted diagnosis. Tell the plumber about recent valve work, a cistern that has been removed, or movement of the toilet. Share a photograph showing the relationship between the cistern, supply connection and pan, not just a close-up of the puddle. The inspection can then include the relevant seals and supported fixings. Any cracked ceramic or unstable assembly should be reported without placing further load on it.
Useful observations
- Record the first wet point and when it was noticed.
- Keep an actively leaking toilet unused while help is arranged.
Details to include in your enquiry
- Is water visible at the inlet connection or between the cistern and pan?
- Was the cistern or a fill valve recently removed or replaced?
An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.
Further information
Your model’s instructions take precedence over general guidance.