Match the operating action to the mechanism
Fluidmaster explains that many of its dual-flush syphons give a full flush when the lever is depressed and released, and a partial flush when it is held. This can feel counterintuitive if you expect holding the lever to release more water. The guidance applies to the relevant syphon, not every lever-operated toilet. Identify the mechanism from its installation paperwork or a safely accessible marking and check the instructions. A change in household use or a newly fitted syphon may explain why the apparent flush volume has changed.
Keep operation and drainage problems separate
If the correct full-flush action still gives poor results, describe whether water enters the pan strongly, whether the cistern had finished refilling and whether the bowl rises instead of clearing. Do not keep flushing a bowl that is already high. A smaller intended flush and a blockage require different next steps. For a recent installation, ask the installer to demonstrate the intended full and partial actions and confirm compatibility with the toilet. That is more useful than adjusting internal settings simply to reproduce the feel of the old lever.
Useful observations
- Confirm that the fitted mechanism is the relevant dual-flush syphon.
- Allow the cistern to finish its normal refill before judging an ordinary flush.
Details to include in your enquiry
- Does releasing the lever give the documented full flush?
- Was a different mechanism fitted recently?
An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.
Further information
Your model’s instructions take precedence over general guidance.