Check both selectors against the correct instructions
For Turn & Go, the function selector chooses the automatic programme and the thermostat remains at the specified automatic mark. For manual cooking, the thermostat is turned to the desired temperature. This is why a familiar instruction to set both knobs does not apply identically to every mode. Compare the symbols on your actual controls with the model manual rather than assuming another Indesit fascia has the same layout or substituting a temperature by guesswork.
Distinguish a control mismatch from a heating failure
Use the programme only with suitable food and quantities from its supported guidance. If it will not start, record both knob positions and the display state before changing anything. A manual function working correctly while Turn & Go remains unavailable is useful information about the selected control combination. On this arrangement, the function selector’s zero position ends cooking; do not confuse that control with the thermostat’s zero/automatic mark while Turn & Go is selected.
Useful observations
- Match both selector positions to the exact fascia diagram.
- Check whether manual and automatic modes use different thermostat positions.
Details to include in your enquiry
- Is Turn & Go selected on the function knob?
- Is the thermostat at the marked automatic position rather than an ordinary temperature?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.