Keep water in its intended system
The maximum line provides operating space; filling to the brim is not extra cooking capacity. If water has spilled beyond the reservoir into controls, vents or the cabinet, stop and seek advice rather than switching on to dry it.
Check the source of the spill
A tank that overflows during filling is different from one that leaks after correct filling. Note which happened and where water first appeared. Do not seal a cap with tape or use a substitute container. If the reservoir or its accessible seal looks damaged, report that condition and the model so the appropriate part can be identified.
Useful observations
- Reduce the level only through the documented safe emptying method.
- Look for water outside the intended reservoir area.
Details to include in your enquiry
- Did water escape during filling or after insertion?
- Was the tank above its marked maximum?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.