General guidance · Electric ovens

Check the accessible filter when safe

After the appliance is off and sufficiently cool, follow the model's instructions to inspect the cavity floor filter. Miele describes blocked holes, a missing filter and an incorrectly seated filter as possible causes. Cleaning or refitting that permitted accessory is different from opening the drainage pump or putting tools into the drain. A generic picture from another DGC generation may show a different filter orientation, so use the correct diagram.

Keep internal and installation checks for assessment

If normal filter care does not resolve the fault, record how much water remains, when F196 appears and whether cleaning or a recent move preceded it. Manufacturer guidance also contains generation-specific software and drain-route considerations; these are not reasons to pull a built-in oven out or alter its hose arrangement yourself. Provide the complete DGC model so the next assessment follows the applicable fault path rather than an assumed universal F196 repair.

Useful observations

  • Check the correct model's floor-filter diagram.
  • Clean and seat only the permitted removable accessory.

Details to include in your enquiry

  • Did the warning start after filter cleaning?
  • Does water remain in the cavity despite correct filter care?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.