Check the cleaning preparation when cool
End the failed attempt and allow the oven to cool and unlock normally. Miele's next owner step is to remove coarse soiling before restarting the supported cleaning process. Follow the model's preparation instructions for accessories and residue; pyrolytic cleaning is not a reason to leave large deposits or spills inside deliberately. Do not force a locked door to reach the cavity while it remains hot.
Keep a recurring warning as evidence
Record whether F23 occurred near the beginning or later in the cycle, and whether the preparation was completed before the attempt. If the warning persists after the permitted correction, arrange assessment instead of repeatedly launching high-temperature cleaning. A recurring failure to reach the cleaning temperature needs a different account from a normal cooking programme running at a lower setpoint. Keep the exact model and full displayed code available without guessing which heater or sensor must be replaced.
Useful observations
- Allow normal cooling and unlocking before inspecting residue.
- Remove coarse soiling as the model instructions require.
Details to include in your enquiry
- Was the cavity prepared before cleaning?
- Does F23 return after the permitted correction?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.