General guidance · Electric ovens

Identify the active control method

Check whether DeltaT was selected and note the chosen intensity and target core temperature. A steadily changing cavity target can be normal in this mode; comparing it with a conventional recipe's single oven temperature would be misleading. Smeg describes slow, medium and fast DeltaT choices on the referenced model. These describe the supported cooking method, not a user calibration of the thermostat or a correction for an oven that runs hot.

Keep the probe observation in the report

Use the documented probe position and compatible food arrangement. If a reading suddenly jumps, loses connection or looks implausible, record the core reading alongside the cavity target and programme stage. Do not keep raising the core target merely to force a higher cavity temperature. If ordinary fixed-temperature cooking also behaves abnormally, report that separately. The distinction helps separate a programmed relationship between two temperatures from an uncontrolled heating problem.

Useful observations

  • Confirm DeltaT is the selected method.
  • Record the core target and displayed cavity target together.

Details to include in your enquiry

  • Is the cavity target rising with the probe reading?
  • Does the same problem occur on an ordinary fixed-temperature function?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.