Identify the local drainage control
Sanifloor+ uses a water-level sensor in its waste to activate the pump through a local wireless link. Restarting a broadband router does not establish whether that drainage control is working. Tell the engineer which Sanifloor generation is installed and whether the problem began after work around the shower, waste or pump location. The brand name alone does not identify the fitted sensor arrangement.
Keep the investigation outside the equipment
Photograph only the accessible pump identification and visible shower waste. Report whether water collected before any pump sound, whether an indicator changed and whether drainage eventually resumed. Do not open a sensor, change pairing switches or pour water into the shower to force a response. If water is accumulating, stop using the shower. The next assessment needs to consider the installed sensor, its communication and the pump as a complete system.
Useful observations
- Use the exact Sanifloor or Sanifloor+ name from the fitted equipment.
- Mention any recent replacement of the waste, pump or surrounding panels.
Details to include in your enquiry
- What happens at the shower waste before the pump is heard?
- Did the problem follow alterations around either component?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.