Clean the complete external contact arrangement
Switch cooking off, allow safe cooling and remove the knob as described. Use the permitted soft cloth to clean and dry the relevant surfaces, then replace the complete control on its marked position. Do not spray cleaner into seams, submerge the accessory unless explicitly permitted or scrape its underside with a blade.
Observe what remains wrong
Check whether the knob now selects zones but cannot change power, rotates without response or is not recognised at all. These are different symptoms worth describing. A misplaced lower part or visible damage can also matter, so compare the assembly with the manual. If correct external care and placement do not restore operation, arrange advice with the hob model and accessory details. Avoid starting with a factory reset that could erase useful preferences without resolving contamination or a physical accessory problem.
Useful observations
- Check the underside of the removable control and its marked glass area.
- Dry both surfaces before correct replacement.
Details to include in your enquiry
- Did the symptom start immediately after cleaning?
- Does zone selection work even though rotation does not?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.