Match the surface geometry
Use flat-bottomed cookware with dimensions suited to the plate. A pan that wobbles or touches only around an edge can waste heat and give uneven results. Check for residue under the base before blaming the plate, but inspect only when everything is cool.
Choose a stable comparison
If a familiar flat pan works normally while a distorted one performs poorly, replace the unsuitable cookware rather than changing the hob. If several appropriate pans have become slow on the same plate, record that pattern for assessment. Do not hold a rocking pan down, bend its base or use foil to fill the gap.
Useful observations
- Check the cool pan sits flat and stable.
- Match the base to the plate's recommended size.
Details to include in your enquiry
- Is poor performance limited to the curved pan?
- Does the vessel rock or touch only at its edges?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.