Identify a demonstration pattern
Notice whether the same sequence repeats and whether touching a control changes it into a different non-heating display. Check the model's documented demo or showroom indicator rather than diagnosing from a lit screen alone. An ex-display appliance or a recently changed setting makes this possibility especially relevant, but it is not proof that every cold hob is in demonstration mode.
Use only the matching owner procedure
Follow the manual's normal instructions for that mode if the indication matches. Do not try random combinations from another Miele model or enter service programming. If the repeating sequence ends but suitable cookware still does not heat under ordinary operation, record that as a remaining symptom. If there is damage, a smell or an electrical trip, address that concern directly instead of treating demonstration mode as an explanation for it.
Useful observations
- Look for the documented demo or showroom indication.
- Compare the repeating sequence with the model instructions.
Details to include in your enquiry
- Was the appliance supplied as an ex-display model?
- Does the same simulated sequence repeat?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.