Watch the number actually accepted
A finger slightly beyond the intended sensor can select an adjacent level. During normal attended operation, check the displayed result rather than assuming the point touched was accepted. Miele suggests sliding across the numerical display to reach the required level instead of tapping directly on one number. Use this only where the model has that supported control arrangement. It is not a reason to press harder or use a pointed object on the glass.
Separate aiming difficulty from erratic operation
Note whether a steady slide allows every level to be selected, or whether one section consistently fails regardless of approach. Also distinguish a wrong initial selection from a level that changes after you have removed your hand. Those observations describe different problems and prevent an imprecise touch from being reported as spontaneous heating changes. Persistent unexplained changes need attention even if the initial neighbouring-number behaviour has a documented explanation.
Useful observations
- Confirm the model family and slider arrangement.
- Observe the displayed level after selection.
Details to include in your enquiry
- Can a steady slide select the intended level?
- Does the level change again without a touch?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.