Distinguish timed assistance from boiling detection
Miele's covered troubleshooting guidance identifies a large food load or poor heat transfer through the pan as reasons for disappointing Auto heat-up results. This differs from a dedicated boiling sensor that measures a particular event. Read the function description before expecting the initial high-power stage to continue until your own visual target is reached.
Choose the method that fits the load
For a quantity outside the useful range of the automatic sequence, follow the manual's normal manual-heating approach and reduce power appropriately while supervising the pan. Do not keep restarting Auto heat-up to force repeated maximum-power bursts. Record the selected continued-cooking level, vessel and load if behaviour has changed from previously successful use. A repeatable problem with ordinary suitable quantities deserves assessment, while one unusually large batch does not establish that the hob's temperature sensing has failed.
Useful observations
- Identify whether the function is timed heat-up or actual boil sensing.
- Match the cooking method to the pan and load.
Details to include in your enquiry
- Was the quantity much larger than usual?
- Does the function reduce power at its expected stage?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.