Observe the documented operating condition
The UK instructions for the K 28202 D family explain that its fan stops automatically while the refrigerator door is open. DynaCool is intended to distribute cooled air within the storage space; it is not a promise that the fan will run continuously in every door and compressor state. Check that your exact model uses the same arrangement. A fan seen stationary immediately after opening the door is not, by itself, a useful diagnosis of a failed motor.
Describe the actual cooling change
Keep hands and tools away from the fan and do not press or defeat the door detection system to make it operate for a demonstration. Instead, note whether stored items are warming, whether one area is affected, and whether the DynaCool setting was recently changed. Keep food clear of the documented airflow openings. If the appliance no longer maintains suitable storage conditions, provide the model, chosen temperature and the timing of that change. Those facts help distinguish a real cooling concern from the normal pause caused by opening the door. An engineer can assess the fan under the correct operating conditions if required.
Useful observations
- Check the model’s DynaCool description and selected setting.
- Observe food-compartment performance rather than trying to expose a running fan.
Details to include in your enquiry
- Did a cooling change occur, or was the stopped fan the only observation?
- Was the door open whenever the fan was checked?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.