General guidance · Standard fridges

Distinguish a retained divider from a loose shelf

AEG describes more than one shelf arrangement. A movable shelf or bottle rack may slide on wall runners, whereas a glass shelf separating drawers can be held by locking pins at both sides. Resistance therefore does not prove that dried food is the obstruction. Empty the relevant area and compare the visible supports with the instructions for your product number. Do not lever the glass, twist the frame or reach behind a fixed appliance to investigate.

Use the correct removal and refitting sequence

For the pin-retained design in the linked guidance, the surrounding drawers come out before the two retaining pins are withdrawn and the shelf slides forward. Follow the manufacturer’s preparation and electrical-disconnection instructions first, using only safely accessible controls and connections. When refitting that design, the pins must return fully to their seats. If your shelf has different brackets, or a pin will not release normally, stop and request the matching instructions or help. Record a photograph of the visible fixing rather than sending only the width of the glass; the support arrangement matters as well.

Useful observations

  • Match the retaining arrangement to the correct product instructions.
  • Check both retaining pins are fully seated after an authorised refit.

Details to include in your enquiry

  • Is this a drawer divider or an ordinary adjustable shelf?
  • Are there visible retaining pins at the sides?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.