General guidance · Fridge freezers

Match the display to the guidance

AEG's E11 article identifies an overly cold refrigerator compartment and advises checking Super Cool, the set temperature and clear vents. Its separate dash-display guidance also calls for a temperature check. Photograph the whole panel so a dash, minus sign and code are not confused. These meanings apply to the relevant AEG products, not every display that uses similar characters.

Make one controlled adjustment

Record the current setting and whether rapid cooling is active. Restore the intended ordinary setting according to the model manual and keep food clear of the identified vents. Use a suitable thermometer to compare the compartment with the display rather than relying only on a frozen lettuce leaf. If the warning returns or food continues freezing, include the reading, its location and the settings tried in your enquiry.

Useful observations

  • Check for Super Cool before lowering the temperature again.
  • Keep a photograph of the original display and control setting.

Details to include in your enquiry

  • Is the dash part of a negative number or the only character shown?
  • Does overcooling affect the whole fridge or one vent-adjacent area?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.