Check the available space
Measure and photograph the door's unobstructed path without forcing it against a wall or adjacent handle. The manual requires at least 70 degrees and identifies 90 degrees as useful for drawer access. Confirm the appliance and furniture installation before trying repeated configuration runs.
Arrange a workable setting
Follow the documented owner setup only when the opening path is clear and all drawers are inserted. A reference run moves the door automatically, so keep hands away from hinges and travel areas. If the room cannot accommodate the required movement, ask the installer about the layout rather than defeating the limit. Report the unsaved-angle symbol with the available clearance so the enquiry focuses on configuration and installation together.
Useful observations
- Check both the minimum angle and practical drawer removal.
- Clear the whole path before a documented reference run.
Details to include in your enquiry
- Is a wall or neighbouring handle limiting the angle?
- Can the selected opening provide normal access to all drawers?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.