General guidance · Dishwashers

Compare surfaces and results

A thin film inside the closed wash cabinet is different from droplets escaping onto the floor or an entire load remaining wet. Check the result after the programme has genuinely finished, allowing for any documented drying extension. Photograph the inside surface without treating it as evidence that the door seal is leaking.

Watch what changes over time

The manufacturer's guidance says this internal moisture dissipates after a while. Note whether it gradually clears and whether dishes are otherwise clean and dry. Standing water above the filter, water outside the appliance, or persistent cold wet crockery should be described separately. Do not try to eliminate normal condensation by fitting an improvised seal or blocking a vent. If seeking advice, include the programme, material of the wet items and the time between completion and inspection.

Useful observations

  • Distinguish a surface film from a pool or an external leak.
  • Check whether drying options or programme choices recently changed.

Details to include in your enquiry

  • Are the dishes dry even though the metal door is damp?
  • Does the moisture remain inside the wash cabinet?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.