General guidance · Dishwashers

Stop the water supply safely

Miele's guidance says the programme is cancelled and the drain pump runs when the protection activates. Close the identified accessible water stopcock if safe, switch the dishwasher off and disconnect its supply only where this can be done safely. Do not reach through water or move a built-in machine to find an inaccessible plug.

Arrange assessment of the event

Report F70, any visible water and the stage of the wash. A pump that keeps running with the door open can belong to this protective sequence rather than a faulty door interlock. Do not tilt the dishwasher to empty a hidden tray, bypass a sensor or restart it simply because the floor looks dry. The reason the protection activated must be established before normal use resumes; resetting the display alone does not establish that a leak has been repaired.

Useful observations

  • Keep people away from wet electrical areas.
  • Photograph visible water from a safe position before it is cleaned up.

Details to include in your enquiry

  • Did the warning begin during filling, washing or while idle?
  • Is the water isolation point accessible without moving the appliance?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.