General guidance · Dishwashers

Stop the leak before investigating

Stop the programme and keep clear of wet electrical equipment. If safely accessible, use the identified water isolation valve. Do not run another wash to obtain a better video. A photograph of where water first appeared, taken from a safe dry position, is useful even if the quantity seems small.

Report what can be seen externally

Once safe and cool, note visible damage or debris around the accessible door seal without removing it. Mention unusual foam, a newly fitted door panel or an obstructed spray arm noticed while unloading. These observations guide assessment but do not prove the seal is the only cause. Water that first appears at the front may originate elsewhere.

Useful observations

  • Record whether the leak began during filling, washing or draining.
  • Retain the detergent packaging if a different product was used.

Details to include in your enquiry

  • Was there excessive foam inside?
  • Did the leak begin after a loading or installation change?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.