General guidance · Dishwashers

Confirm the programme completed

Check that a full wash and drying stage actually finished rather than a rinse-only cycle or interrupted programme. Record any warning and whether detergent dissolved. A cold load assessed long after the cycle ended is different from one that was unexpectedly cold immediately at completion, so include when you checked it.

Report related changes together

If washing quality also deteriorated, explain both symptoms when booking. The engineer can assess temperature control and the wider programme sequence without assuming a specific component has failed. Do not reach into the machine during operation or use a hotter cycle repeatedly as a test. Consult rinse-aid and drying settings only where there are no leaks or electrical warnings.

Useful observations

  • Note the programme and the time between its end and your inspection.
  • Record whether every basket and material is affected.

Details to include in your enquiry

  • Was the programme interrupted?
  • Has washing performance changed as well as drying?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.