General guidance · Dishwashers

Capture both displays

The manufacturer explains that the drawer showing U4 is being prevented from operating by the other drawer's fault. Photograph the upper and lower indications separately and label which is which. Reporting only U4 can hide the warning that actually starts the investigation. This interpretation must be matched to the exact model and guide rather than extended to every Fisher & Paykel appliance.

Do not assume two separate failures

Record which drawer was washing, which was idle and whether the warnings appeared together. Follow the instructions for the primary fault, including any requirement to stop use or isolate the machine. Do not keep trying the apparently unaffected drawer to bypass the warning. For an enquiry, give both codes, the appliance identification and any visible leakage or unfinished water in either drawer.

Useful observations

  • Record the upper and lower drawer indications separately.
  • Identify the first warning if it was seen before U4 appeared.

Details to include in your enquiry

  • Which drawer displays U4 and what does the other show?
  • Were both drawers running when the warning occurred?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.