General guidance · Electric cookers

Prepare the space before lifting

Read the illustrated instructions for the exact model and remove the accessories the procedure specifies. Make sure you can support the divider securely throughout the movement. If it feels too heavy or awkward, obtain assistance rather than balancing it on the open door. The manufacturer's protective handling guidance is intended to prevent contact between metal edges and glass.

Inspect the result without dismantling

After removal, keep the divider in a stable place where its edges and fittings cannot be damaged. Check for any visible scratch or impact mark caused during handling before using the oven again. Do not slide the panel along the glass or lever it out against the frame. If it catches despite the stated procedure, stop and arrange advice; a stuck accessory should not be forced until a support or door component bends. Configuration changes are best completed before the cooking session starts.

Useful observations

  • Allow the cooker to cool fully before changing the divider.
  • Follow the illustrated handling route and support the panel securely.

Details to include in your enquiry

  • Does the divider move freely as the manual describes?
  • Has any edge contacted the door glass?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.